Fiidotherm supplies heat pump water heaters for residential, commercial and industrial use in Aurangabad (Chhatrapati Sambhajinagar) — and this is where they’re actually made. Fiidotherm’s manufacturing facility sits at MIDC Waluj, right here in the city, as part of the Sudarshan Saur Shakti Group, manufacturing water heating systems in India since 1989.
Aurangabad’s semi-arid climate — warm most of the year, favourable for heat pump efficiency
Fiidotherm’s own manufacturing facility is located right here in the city
Industrial line output, up to 50,000 L/day
Sudarshan Saur Shakti Group manufacturing legacy
Fiidotherm’s heat pump range covers five uses: domestic (up to 2,000 L/day, up to 4 COP), commercial (20,000+ L/day and above, up to 6 COP) for hotels and apartments, industrial (up to 50,000 L/day, up to 90°C) for process water, swimming pool heating, and space heating & cooling. Each line draws ambient heat from the surrounding air instead of burning fuel or relying on resistive heating, and Aurangabad’s warm, semi-arid climate for most of the year works in the technology’s favour. Tell us which use case applies to you and we’ll point you to the right product and sizing guidance.
Fiidotherm is the heat pump division of the Sudarshan Saur Shakti Group, which has manufactured solar water heaters in India since 1989 and is described by the company as India’s highest-selling solar water heater brand. Every Fiidotherm unit — for Aurangabad and every other city in this network — is built right here at the company’s own manufacturing facility in MIDC Waluj, with a Japanese/American-standard compressor, an electronic expansion valve for precise flow control, and a glass-lined, double-access storage tank designed to be cleaned rather than replaced. For an Aurangabad business evaluating a long-term utility vendor, being able to see the actual manufacturing facility rather than just a spec sheet is a genuine, local advantage.
Fiidotherm’s product range serves different needs across Aurangabad — from a single bungalow to a multi-shift auto-component unit. Find the section that matches your project below; each links to a fuller guide.
Architects
The domestic line (up to 2,000 L/day, up to 4 COP) needs no rooftop collector space and runs quietly — a fit for Aurangabad’s residential projects, though this isn’t currently a priority segment for the city. Aurangabad’s residential growth is concentrated in areas like Cidco and Garkheda, with newer development along the Beed Bypass and Jalna Road corridors. The general plant-room-based logic applies here as elsewhere, but a dedicated local guide for this segment isn’t published yet; get in touch directly if this is your project type.
Builders
For a mid-rise apartment project, the commercial line scales from 20,000 L/day and above at up to 6 COP, sized centrally rather than unit-by-unit. Aurangabad’s newer apartment growth runs along the Beed Bypass and Jalna Road corridors, alongside established residential belts like Cidco and Garkheda. A heat pump supplier sizing one centralized system for a growing society here replaces the scattered maintenance load of dozens of individual electric geysers with a single system the society maintains once — though this isn’t currently a priority segment for the city given its stronger industrial and hospitality profile.
Hospitality
Aurangabad’s hotels, serving one of Maharashtra’s largest tourism circuits, run hot water as a constant, high-occupancy utility cost. The commercial line (20,000+ L/day and above, up to 6 COP) is built for exactly that demand. The Ajanta and Ellora caves — both UNESCO World Heritage Sites on Aurangabad’s outskirts — along with Bibi Ka Maqbara and the Grishneshwar Jyotirlinga temple, draw a steady flow of domestic and international visitors through the city’s hotels year-round. A hotel in this segment runs at sustained occupancy through the main tourist season, which is a genuinely different demand pattern from a purely business-travel city — a commercial heat pump supplier’s continuous-recovery design suits this well, with sizing based on actual room count and seasonal occupancy.
Industrial
Aurangabad is central Maharashtra’s auto-manufacturing hub, with major players including Bajaj Auto, Skoda and Audi India operating out of its MIDC estates. The industrial line (up to 50,000 L/day, up to 90°C) is built for continuous process-water duty, as an alternative to a boiler or immersion heater. Aurangabad’s industrial base runs through the Waluj, Shendra and Chikalthana MIDC estates — Waluj in particular is the auto and auto-component feeder belt for Bajaj Auto, Skoda and Audi, and is also where Fiidotherm’s own manufacturing facility is located. Auto-component and ancillary units in this belt commonly need continuous hot water for cleaning, degreasing and finishing stages. As an industrial heat pump manufacturer, Fiidotherm sizes systems for a mid-size unit in Waluj, Shendra or Chikalthana to match output to actual demand across a full shift, rather than keeping a boiler at temperature through lower-volume stretches between batches.
Swimming pools
Hotels and societies running a pool can extend the comfortable-use season with the swimming pool line (10,000 L/day to 20 lakh L/day, up to 32°C, titanium heat exchanger) — though this isn’t currently a priority segment for Aurangabad specifically. The same logic applies to any pool operator in the city, including hotels serving the Ajanta-Ellora tourist circuit: a swimming pool heat pump extends the usable season without the running cost of a fossil-fuel heater.
A solar water heater is a strong option where a building has clear, unobstructed roof exposure — Sudarshan Saur Shakti has manufactured them since 1989, and this isn’t a case of one technology being talked down to sell another. A heat pump becomes the more practical choice where roof space is committed to other services, where a project needs a compact plant-room-based system, or where hot water demand needs to run independent of sunlight hours — common constraints in Aurangabad’s denser residential and industrial plots.
Fiidotherm is expanding its Maharashtra dealer network, and Aurangabad — as the city where Fiidotherm actually manufactures its heat pumps, with a strong auto-component industrial base and a major tourism-driven hospitality sector — is a priority city. We’re specifically looking to partner with existing high-end bathroom accessory suppliers and solar water heater dealers who already have trade relationships with industrial buyers, hotels and builders in the city. Being based in the same city as the manufacturing facility is a genuine advantage worth discussing directly — if that describes your business, this is worth a conversation about territory, terms and how our existing group distribution can support you.
Yes, generally. Aurangabad has a semi-arid climate with average yearly temperatures between 17°C and 33°C — warm for most of the year, which is favourable for heat pump efficiency. Winter nights are usually mild, though occasional cold snaps from northern winds can briefly push temperatures down to 2–4°C; this is not a sustained seasonal pattern the way it is in a genuinely cold-climate city.
Fiidotherm’s manufacturing facility is located at MIDC Waluj, in Aurangabad itself. For a local buyer, that means the option of seeing the actual manufacturing process rather than relying purely on marketing material — a level of transparency that isn’t available with most vendors shipping in from elsewhere.
Aurangabad’s Waluj, Shendra and Chikalthana MIDC estates host a major auto and auto-component manufacturing base, including Bajaj Auto, Skoda and Audi India. These units commonly need continuous hot water for cleaning and finishing stages. The industrial line (up to 50,000 L/day, up to 90°C) is built as an alternative to a boiler or immersion heater for that duty.
We’re actively building our Maharashtra dealer network, including Aurangabad — our own home city. Contact us for current status.
We’re prioritising Aurangabad as part of our Maharashtra expansion, and being the city where we manufacture makes local partnership especially straightforward.
Get in touch to discuss.
Fiidotherm heat pumps is sister concern of SUDARSHAN SAUR SHAKTI GROUP . Since 1989, Sudarshan Saur Shakti Pvt. Ltd. has been designing, manufacturing and marketing solar water heaters, leading to Sudarshan Saur becoming India’s highest selling brand. Your search for best hot water solutions using heat pump water heater in India, ends here. To know the heat pump water heater price for domestic, commercial or industrial installation, contact us or our nearest dealer in your city.